MIDI Input

It is possible to control many of Tempera’s internal parameters by MIDI CC.

Control Change (CC) parameters

CC	Parameter
10	Active emitter
11	Place emitter
12	Remove emitter
13	Amp envelope attack
14	Amp envelope decay
15	Amp envelope sustain
16	Amp envelope release
17	Reverb size
18	Reverb color
19	Reverb mix
20	Delay feedback
21	Delay time
22	Delay color
23	Delay mix
24	Filter cutoff
25	Filter resonance
26	Chorus depth
27	Chorus speed
28	Chorus flange
29	Chorus mix
30	Track 1 volume
31	Track 2 volume
32	–
33	Track 3 volume
34	Track 4 volume
35	Track 5 volume
36	Track 6 volume
37	Track 7 volume
38	–
39	Track 8 volume
40	Emitter 1 volume
41	Emitter 1 grain size
42	Emitter 1 grain size time
43	Emitter 1 grain density
44	Emitter 1 grain envelope
45	Emitter 1 grain pan
46	Emitter 1 tune spread
47	Emitter 1 octave
48	Emitter 1 relative X
49	Emitter 1 relative Y
50	Emitter 1 spray X
51	Emitter 1 spray Y
52	Emitter 1 tone filter width
53	Emitter 1 tone filter center
54	Emitter 1 effects send
55	Emitter 2 volume
56	Emitter 2 grain size
57	Emitter 2 grain size time
58	Emitter 2 grain density
59	Emitter 2 grain envelope
60	Emitter 2 grain pan
61	Emitter 2 tune spread
62	Emitter 2 octave
64	Damper pedal
63	Emitter 2 relative X
65	Emitter 2 relative Y
66	–
67	Emitter 2 spray X
68	Emitter 2 spray Y
69	Emitter 2 tone filter width
70	Emitter 2 tone filter center
71	–
72	Emitter 2 effects send
73	Emitter 3 volume
74	–
75	Emitter 3 grain size
76	Emitter 3 grain size time
77	Emitter 3 grain density
78	Emitter 3 grain envelope
79	Emitter 3 grain pan
80	Emitter 3 tune spread
81	Emitter 3 octave
82	Emitter 3 relative X
83	Emitter 3 relative Y
84	Emitter 3 spray X
85	Emitter 3 spray Y
86	Emitter 3 tone filter width
87	Emitter 3 tone filter center
88	Emitter 3 effects send
89	Emitter 4 volume
90	Emitter 4 grain size
91	Emitter 4 grain size time
92	Emitter 4 grain density
93	Emitter 4 grain envelope
94	Emitter 4 grain pan
95	Emitter 4 tune spread
96	Emitter 4 octave
97	Emitter 4 relative X
98	Emitter 4 relative Y
99	Emitter 4 spray X
100	–
101	–
102	Emitter 4 spray Y
103	Emitter 4 tone filter width
104	Emitter 4 tone filter center
105	Emitter 4 effects send
106	Modulator 1 amount
107	Modulator 2 amount
108	Modulator 3 amount
109	Modulator 4 amount
110	Modulator 5 amount
111	Modulator 6 amount
112	Modulator 7 amount
113	Modulator 8 amount
114	Modulator 9 amount
115	Modulator 10 amount

Grid cells for emitter placement are numbered starting at top left, column by column. To place or remove emitters:

• First set the Active emitter by sending CC10 with value between 0 and 3. Value of 0 is the first (blue) emitter.

• Send CC11 with value between 0 and 63 to place an emitter

• send CC12 with value between 0 and 63 to remove an emitter

For example, to place emitter 1 on the first cell of first track:

• Send CC10 with value 0 to set the active emitter to 1

• Send CC11 with value of 0 to place the emitter

Or remove emitter 2 from the second cell of the second track

• Send CC10 with value 1 to set the active emitter to 2

• Send CC12 with value 9 to remove the emitter

In other words, cells in the first track are 0 to 7, second track are 8 to 15, third track are 16 to 23, and so on.